中空玻璃生产线主要是分为有七段。

The insulated glass production line is mainly divided into seven sections.

一段是放玻璃,把玻璃放在生产线上。

One section is about placing glass on the production line.

二段是清洗风干,清洗这边是靠风刀风干玻璃。

The second stage involves cleaning and air drying, while the cleaning process on this side involves using an air knife to air dry the glass.

玻璃清洗完成之后进入第三段第三段是检查段，检查玻璃干净不干

After the glass cleaning is completed, enter the third section, which is the inspection section. Check that the glass is clean and not dry

第四段是铝框安装段，四段这里有下面的定位和上面的定位，铝框顺着定位把铝框安装在玻璃上,进入下一段。

The fourth section is the aluminum frame installation section, where there are lower and upper positioning. The aluminum frame is installed on the glass along the positioning and enters the next section.

第五段是和片段,玻璃顺着上下两个横梁悬空过来，两片合在一起。

The fifth paragraph is about the scene where the glass is suspended along the upper and lower crossbeams, and the two pieces are merged together.

进入第六段是平压段,第六段把两片玻璃压合均匀。

Entering the sixth section is the flat pressing section, where the two pieces of glass are evenly pressed together.

压实之后进入中空线的最后一段，等待段，这一段就等待进入中空玻璃全自动封胶线封胶。

After compaction, it enters the last section of the hollow line, the waiting section, which is waiting to enter the fully automatic sealing line for insulating glass.

本文由中空玻璃生产线友情奉献.更多有关的知识请点击: http://www.china-greatflooring.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from the production line of insulated glass. For more information, please click: http://www.china-greatflooring.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned